Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Seat Leon?

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Service warning light

To reset the Service light on a Seat Leon, press and hold the 0.0/SET button located in the centre of the instrument cluster while it is turned off. Continue holding this button, then insert the ignition key into the barrel and turn it. Keep holding the button for a few seconds until the Service light disappears. Once the reset is complete, you can turn off the instrument cluster by turning the key again.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2005-2013 / 1P) To reset the Service light on the Seat Leon, press and hold the button located in the centre of the instrument panel while it is off. Continue holdin…
Seat Leon (2005-2013 / 1P) To manually reset the service light of your Seat Leon second series, you must follow the procedure described in our new guide. First of all, enter th…
Seat Leon (2005-2013 / 1P) To reset the service light on a Seat Leon, press and hold the button located in the centre of the instrument cluster. While holding the button, inser…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos