Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Seat Leon Cupra?

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the service on a Seat Leon Cupra, an extremely simple and quick operation to perform only after completing all scheduled maintenance tasks. First, enter the cabin, then insert the key and turn on the instrument panel.

Next, navigate to the "Range" display using the directional controls on the steering wheel, press and hold the "OK" button for about five seconds, and in the menu that appears, select the reset you wish to perform. At this point, simply restart the vehicle and check that the procedure has been successful.


Posted on 17 February 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light in the Seat Leon Cupra?
How to reset the tire pressure warning light in the Seat Leon Cupra?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, we can see how to reset the tire pressure light in the Seat Leon Cupra, a very simple and quick operation, to be carried out only o…
How to Reset the Infotainment System on a Seat Leon or Cupra Formentor
How to Reset the Infotainment System on a Seat Leon or Cupra Formentor
Seat Leon (2020-2026 / KL1, KL8) If the infotainment system on your Seat Leon or Cupra Formentor continues to load but fails to turn on, perform a hard reset as follows: press the bu…
How to remove the rear door panel of the Seat Leon Cupra
How to remove the rear door panel of the Seat Leon Cupra
Seat Leon (2012-2019 / 5F, MK 3) These brief and simple instructions will illustrate how to remove the rear door panel of the Seat Leon Cupra. First, open the rear door and start uns…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos