Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair the Fuel Filler Cap on a Seat Leon

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Let's see how to repair the fuel filler cap on a Seat Leon: it remains in the "unlocked" position even when the car is locked. The cause is almost always a fault in the locking motor, which is a small electric actuator.

You can find it on Amazon with the code B0DM617W5W for £23.75, with free delivery in 2 days for Prime customers. The motor is not located behind the cap, but inside the boot.

You need to remove a side panel on the side where the cap is located, usually held by a clip. After removing the cover, you need to remove a screw to unlock the mechanism.

Once removed, disconnect the electrical connector, replace the component, and reassemble everything in reverse order. Before refitting the panels, check that everything works properly.


Posted on 16 May 2026 by ScegliAuto


Related tutorials

Seat Leon (2012-2019 / 5F, MK 3) This guide shows how to open the fuel flap and cap on a Seat Leon in simple steps. First, unlock all the door locks using the remote; then press on t…
Seat Leon (2005-2013 / 1P) The procedure is similar for the following models: -AUDI A3 8PA -SEAT Toledo 5P2 -SKODA Octavia 1Z5 -VW Golf V. However, note that there may be sligh…
Seat Leon (2005-2013 / 1P) In this tutorial, you can see how to replace the diesel filter in the Seat Leon 1P, a very simple and cost-effective operation. First, open the fuel …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos