Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of a Seat Leon

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Here is another short, useful video that shows how to replace the battery of the remote for your Seat Leon independently, saving time and money. Let's get to the task: on the back of the remote, you will find the compartment for the battery.

Using a screwdriver, insert it into the slot where the key is located and unlock the battery cover. At this point, remove the old battery and insert the new one, then refit the cover and you are done.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Control Battery for a Seat Leon
How to Replace the Remote Control Battery for a Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) If pressing the buttons on the remote control does not activate the door locks, it is likely that the remote battery has run out. The required batter…
Replacing the Key Fob Battery for the Seat Leon
Replacing the Key Fob Battery for the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) The following steps will show you how to disassemble and replace the battery of the key fob for the Seat Leon, following the instructions below. Firs…
Replacement of the battery of the key fob for the Seat Leon.
Replacement of the battery of the key fob for the Seat Leon.
Seat Leon (2020-2026 / KL1, KL8) Today's information will show us the process of disassembling and replacing the battery of the key remote for the Seat Leon. First, we take our remot…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos