Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Antenna on a Seat Cordoba

Model: Seat Cordoba MK 1 - Years 1993-2002
Part: Antenna

Is the antenna on your Seat Cordoba damaged? Here’s how to remove and replace it. Unscrew the faulty antenna by hand from its base on the roof. Continue unscrewing until it completely detaches from its mount. Take the new antenna and screw it into the thread on top of the base until it is fully tightened in the plastic base on the roof of your car. Check the antenna's proper functioning by turning on the car radio and checking the reception of channels. If the antenna does not work, you need to replace the antenna base.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Cordoba (2002-2009 / MK 2) Follow the steps below to remove and replace the window switch panel on the Seat Cordoba, as well as the Seat Ibiza. First, open the front door and s…
Seat Cordoba (2002-2009 / MK 2) To program the key for the Seat Cordoba, insert the new blank key into the ignition switch: once inserted, connect a diagnostic tool to the vehicle's…
Seat Cordoba (2002-2009 / MK 2) In this guide, discover where the fuse box is positioned in your Seat Cordoba Mk2. The entire operation takes just a few seconds and you only need a …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos