Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Headlight on a Seat Leon

Model: Seat Leon 1P - Years 2005-2013
Part: Headlight

In this video tutorial, learn how to remove the front headlights on a Seat Leon. First, lift the bonnet: to remove the headlights, you will also need to remove the bumper. Unscrew the screws located at the bottom of the bumper and those at the top near the engine bay that hold the bumper in place. Once removed, proceed to unscrew the Torx screws of the headlight located both at the top and bottom, as shown in the video: at this point, simply disconnect the electrical connector to remove the headlight and change the bulbs if desired!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2012-2019 / MK 3, 5F) How to replace the front headlight bulb on a Seat Leon? Lift the front bonnet to access the headlights. Remove the plastic cover at the back of the h…
Seat Leon (2005-2013 / 1P) To replace the front headlight bulb on the Seat Leon, first immobilise the car on a flat surface or place it on a ramp to work safely. Once done, ope…
Seat Leon (2020-2026 / KL1, KL8) This guide provides instructions and steps for dismantling and replacing the front headlight of a Seat Leon. First, open the car's bonnet and start u…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos