Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Antenna from a Seat Ibiza

Model: Seat Ibiza 6L - Years 2002-2009
Part: Antenna

In this video, you will see how to remove the radio antenna from a Seat Ibiza. First, open the boot door and remove the snap-fit plastic that connects the headlining to the car and take off the rear pillars held in place with their respective screws to release the rear part of the headlining and access it enough to disconnect the antenna. Next, unscrew the antenna nut and pull it out from the outside of the car. At this point, you can replace the antenna base or the entire antenna: follow the video to the end for reassembly!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna on a Seat Ibiza?
How to Replace the Antenna on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial, you will see how to replace the antenna on a Seat Ibiza, a very simple and quick operation. First, ensure that the key is not inser…
How to Remove the Radio Antenna from a Seat Ibiza?
How to Remove the Radio Antenna from a Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) Unless it suffers intentional damage, which requires replacing the antenna in question, another rarely occurring reason that necessitates such interv…
How to Replace the Internal Handle of a Seat Ibiza
How to Replace the Internal Handle of a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Start by opening the door of your Seat Ibiza. Next, remove the door panel by unscrewing the fixing screws and disconnecting the electrical connectors…

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2002-2009 - How do you remove the Seat Ibiza antenna? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos