Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on an Ibiza

Model: Seat Ibiza 6L - Years 2002-2009
Part: Rear bumper

Removing the rear bumper on a Seat Ibiza? Let's remove the rear lights to take off the bumper. Open the boot lid, unscrew the securing nuts located at the back of the lights, and remove them after disconnecting the power connectors. Unscrew the screws located at the bottom of the bumper, then remove the screws located at the sides of the wheel arch liners. Unscrew the screws in the rear light area. Once the bumper is free from any screws or nuts, grab it with your hands and pull it away from the bodywork (disconnect any power cables if necessary). Fit the new rear bumper.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper on the Seat Ibiza?
How to disassemble the rear bumper on the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial we can see how to remove the rear bumper on the Seat Ibiza, an extremely simple and fast operation. First of all, we open the rear h…
How to remove the rear bumper on the Seat Ibiza?
How to remove the rear bumper on the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this tutorial we can see how to remove the rear bumper on the Seat Ibiza, an extremely simple and quick operation. First, we open the trunk door, …
How to Change the Number Plate Light on a Seat Ibiza
How to Change the Number Plate Light on a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Is the number plate light not working anymore? Let's see how to remove the number plate bulb on a Seat Ibiza. Use a plastic lever to remove the numbe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos