Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Stop Switch Replacement on Seat Ibiza

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

See other generations:
This video is currently unavailable

Access the driver's side in the pedal area. You will notice, above the brake pedal, the switch (usually coloured and therefore easily visible) that sends the signal to activate the brake lights when you brake.

To access it, unscrew the two screws holding the plastic cover above the pedal area. Use a wedge to remove this plate.

To extract the switch, you need to rotate it to release the tip from the housing, then disconnect the connector and you're done. Very simple! Proceed in reverse to install the new switch.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Where is the Reverse Light Switch on a Seat Ibiza?
Where is the Reverse Light Switch on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) This short video shows where the reverse light switch is located on a Seat Ibiza (the same position applies to the Seat Cordoba) and what steps to ta…
How to open the external mirrors with the switch on a Seat Ibiza
How to open the external mirrors with the switch on a Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Before starting, sit in the driver's seat of your Seat Ibiza. Begin by activating the instrument cluster by turning the key in the ignition switch. T…
How to Deactivate the Passenger Airbag in a Seat Ibiza?
How to Deactivate the Passenger Airbag in a Seat Ibiza?
Seat Ibiza (2017-2026 / KJ, 6F) In this tutorial, you will see how to deactivate the passenger airbag in a Seat Ibiza, a very simple operation to perform, for example, after placing…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos