Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Reverse Light Switch on a Seat Ibiza?

Model: Seat Ibiza 6L - Years 2002-2009
Part: Transmission

This short video shows where the reverse light switch is located on a Seat Ibiza (the same position applies to the Seat Cordoba) and what steps to take to replace it. First, if you have a ramp, it will be easier to work; otherwise, use a jack and a stand for safety to access the switch. It is located on the gearbox block under the plastic cover that needs to be removed. Once removed and the switch identified, simply disconnect the connector and unscrew the switch itself, replacing it with a new one. You can find it online for under £10.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Reverse Light Fuse in the Seat Ibiza?
Where to Find the Reverse Light Fuse in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) If the reverse light of your Seat Ibiza has suddenly stopped working, and the corresponding bulb is in good condition, you can check the relevant fus…
How to Replace the Rear Light Bulb on a Seat Ibiza?
How to Replace the Rear Light Bulb on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the rear light bulb on a Seat Ibiza, lift the boot to access the screws next to the rear light. Once these screws are loosened, you can co…
How to replace the front headlight bulb of the Seat Ibiza
How to replace the front headlight bulb of the Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) Replacing the front headlight bulb of your Seat Ibiza is really simple and thanks to the procedure described in the following mini guide, you will be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos