Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : Replacement of front bulbs on Seat Ibiza

Seat Ibiza - Video tutorial

Model: Seat Ibiza KJ - Years 2017-2024
Part: Headlight bulb
Operation: Replacement of front bulbs on Seat Ibiza

Raise the hood and put on the appropriate support rod. Observe the area behind the light and the bulb concerned: there will certainly be a metal catch that will hold a cover in place. Unhook that latch and you can remove the lid by simply pulling it. At this point, disconnect the connector of the exhausted bulb and you will find another metal clip similar to the previous one that you have to unhook. Once you have arrived here, you can simply extract the bulb and insert the new one you purchased. Obviously proceed backwards for the complete reassembly.


Posted on 8 January 2024 by ScegliAuto



How to remove the front headlight bulbs on Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) How to remove the front bulbs of our Seat Ibiza? Let's see how the bulbs placed in the headlights are removed. We lift the front hood, then we find t
How to replace the front headlights bulbs in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this tutorial, we can see how to replace the front headlight bulbs in the Seat Ibiza, an extremely simple and fast operation. First of all, make s
Removing the headlight bulbs on Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Headlight bulbs out of order? Let's see how they replace on a Seat Ibiza. We open the front hood, pulling the lever located at the bottom right of th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos