Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bulbs on the Seat Leon MK3

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear light and replace its bulbs on the Seat Leon third series. First, open the boot and start by unscrewing the plastic screw found inside; then remove the light from the outside, as shown in the video.

At this point, disconnect the electrical connector for the bulbs and proceed to remove and replace the bulbs found inside with the correct type; finally, refit the lights by applying the reverse procedure of disassembly!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs of the Seat Leon
How to replace the rear headlight bulbs of the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) This short and simple guide will show us how to disassemble and replace the bulbs of the rear light of the Seat Leon. First, we open the rear hatch o…
Replacing the Front Headlight Bulbs on a Seat Leon 5F
Replacing the Front Headlight Bulbs on a Seat Leon 5F
Seat Leon (2012-2019 / 5F, MK 3) How to replace the front headlight bulb on a Seat Leon? Lift the front bonnet to access the headlights. Remove the plastic cover at the back of the h…
How to Replace the Rear Bumper of a Seat Leon?
How to Replace the Rear Bumper of a Seat Leon?
Seat Leon (2005-2013 / 1P) To replace the rear bumper of a Seat Leon, open the boot to access the screws next to the rear lights. By unscrewing these screws, you can remove the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos