Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on a Seat Leon?

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part:

In this video, you can see how to reset the tyre light on the Seat Leon. This operation should only be performed after restoring the correct pressure in each tyre, as indicated on the label inside the fuel filler flap. To reset the light, turn on the ignition and from the vehicle status page, scroll right by pressing "next". Once you reach the tyre page, press "SET" and wait for the procedure to complete. To verify that the reset was successful, check that the tyres are no longer indicated in the "report" section.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Seat Leon?
How to Reset the Tyre Warning Light on the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) In this tutorial, you will see how to reset the tyre warning light on the Seat Leon, a very simple and quick operation to perform only after restorin…
How to reset the tyre pressure light on the Seat Leon
How to reset the tyre pressure light on the Seat Leon
Seat Leon (2005-2013 / 1P) To reset the tyre pressure light on the Seat Leon, turn on the ignition, start the car, and notice that the tyre pressure light is on. To turn it off…
How to Reset the Tyre Pressure Warning Light on a Seat Leon?
How to Reset the Tyre Pressure Warning Light on a Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) From the instrument cluster of the Seat Leon, you can clear the tyre pressure warning light by inflating the tyres until they reach the correct press…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos