Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Seat Leon

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

If you have changed the engine oil and the related filter yourself on your vehicle, you must then reset the service indication that appears on the instrument cluster. To do this, follow the instructions provided in this description and also check the video.

First, locate the button at the bottom centre of the instrument cluster. Start pressing and holding this button for 10 seconds, then turn on the ignition, rotate the button to the right, and wait a few seconds.

After that, turn off the ignition and turn it back on to check that the service light is off.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Seat Leon 2
How to reset the service light on the Seat Leon 2
Seat Leon (2005-2013 / 1P) To manually reset the service light on your second series Seat Leon, follow the procedure described in this guide. First, get into the car and reach …
How to Reset the Service Light on a Seat Leon?
How to Reset the Service Light on a Seat Leon?
Seat Leon (2005-2013 / 1P) To reset the Service light on the Seat Leon, press and hold the button located in the centre of the instrument panel while it is off. Continue holdin…
How do you reset the Service light on the Seat Leon?
How do you reset the Service light on the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) The Service light that appears on the instrument panel of the Seat Leon can be reset by turning on the instrument panel, inserting the ignition key i…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos