Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Valve Cover Gasket

Model: Seat Ibiza 6K - Years 1993-2002
Part: Engine

Before applying the new gaskets, clean the respective seats thoroughly, removing any dirt and deposits; position the sealing rings on the heads of the fastening nuts of the camshaft; apply gasket sealant to the ends of the camshaft (in the radiused area), insert the gasket and then the corresponding cover with the rubber washers, the cover caps and finally tighten the fastening nuts with a torque wrench, proceeding gradually to ensure the gasket adheres evenly without protruding from the edges of the cover.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Seat Ibiza (1993-2002 / 6K) After machining, check the flatness of the cylinder head surface using a straight edge and a feeler gauge; check the valve interference with a depth …
Complete Cylinder Head Overhaul
Complete Cylinder Head Overhaul
Seat Ibiza (1993-2002 / 6K) After having the cylinder head skimmed, check the flatness of the surface using a straight edge and a feeler gauge for valves; apply the new exhaust …
Replacement of Intake Manifold Gasket
Replacement of Intake Manifold Gasket
Seat Ibiza (1993-2002 / 6K) Before applying the new gasket, ensure that the surfaces of both the manifold and the cylinder head are perfectly clean and free of deposits. Then in…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos