Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Turbo Lubrication Pipe

Model: Seat Leon 1M - Years 1999-2005
Part: Engine

Ensuring the lubrication of the turbo is absolutely essential due to the high RPM and constant exposure to the high temperature of exhaust gases; a shaped pipe ensures a constant supply of oil: it is composed of two fittings, one to connect to the base and the other to the centre of the turbocharger, and a support bracket that keeps it securely fixed and prevents stress from vibrations. Therefore, attach the eyelet to the base and the fitting with the threaded nut to the turbo, tightening both with the specified torque using a torque wrench.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Turbo Mounting Kit
How to Install the Turbo Mounting Kit
Seat Leon (1999-2005 / 1M) This video shows how to install the components that secure the turbo on a Seat Leon. After obtaining the kit, open it carefully and extract the vario…
Instructions for Complete Cylinder Head Overhaul
Instructions for Complete Cylinder Head Overhaul
Seat Leon (1999-2005 / 1M) After machining the cylinder head, use a straight edge and a feeler gauge to check the flatness of the surface; then proceed with the replacement of …
Replacing the Timing Chain on the Seat Leon 1.4 TSI
Replacing the Timing Chain on the Seat Leon 1.4 TSI
Seat Leon (2005-2013 / 1P) Here are the main instructions on how to remove and replace the timing chain on the Seat Leon 1.4 TSI. First, open the bonnet and begin by removing t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos