Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Seat Altea?

Model: Seat Altea MK 1 - Years 2004-2015
Part: Service warning light

To reset the Service light on the Seat Altea, press and hold the button in the centre of the instrument cluster while it is off. Continue holding the button, then insert the ignition key into the ignition switch. Turn the key and release the button after a few seconds, then turn it to the left. You will notice that the Service light has been successfully reset; after the reset, turn off and then turn on the cluster to confirm that the reset was successful.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Seat Altea
How to Reset the Service Light on a Seat Altea
Seat Altea (2004-2015 / MK 1) If you own a Seat Altea and want to learn how to manually reset the service light that appears on the instrument cluster, follow these instructions. …
How to Reset the Service Light on the Seat Altea
How to Reset the Service Light on the Seat Altea
Seat Altea (2004-2015 / MK 1) .. In this video, see how to reset the service light on the Seat Altea. It is really quite simple; it takes longer to describe.. …
How to Reset the Service Light on a Seat Altea XL?
How to Reset the Service Light on a Seat Altea XL?
Seat Altea (2004-2015 / MK 1) You can completely erase the Service light on a Seat Altea XL by holding down the button located at the bottom centre of the dashboard while it is of…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos