Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service and Inspection on the Seat Leon Cupra

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Service warning light

To reset the service on the Seat Leon, start by holding down the button in the centre of the speedometer marked "0.0/set" while simultaneously turning on the ignition. Keep the button pressed until the display shows "reset service?". Press the button again with the "0.0/set" label, and "service reset" will appear. To reset the inspection as well, hold down the same button in the centre of the speedometer while turning on the ignition, keeping the button pressed until the display shows "reset inspection?". Press the same button again, and "inspection reset" will appear. Now, with the ignition on, you can check the reset by pressing the "menu" button next to the radio display, selecting "settings", scrolling to "service", and noting when the next intervention is due.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Infotainment System on a Seat Leon or Cupra Formentor
How to Reset the Infotainment System on a Seat Leon or Cupra Formentor
Seat Leon (2020-2026 / KL1, KL8) If the infotainment system on your Seat Leon or Cupra Formentor continues to load but fails to turn on, perform a hard reset as follows: press the bu…
How to Reset the Service on a Seat Leon Cupra?
How to Reset the Service on a Seat Leon Cupra?
Seat Leon (2012-2019 / MK 3, 5F) In this tutorial, we will see how to reset the service on a Seat Leon Cupra, an extremely simple and quick operation to perform only after completing…
How to reset the tire pressure warning light in the Seat Leon Cupra?
How to reset the tire pressure warning light in the Seat Leon Cupra?
Seat Leon (2012-2019 / MK 3, 5F) In this tutorial, we can see how to reset the tire pressure light in the Seat Leon Cupra, a very simple and quick operation, to be carried out only o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos