Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to disassemble the front headlights in the Seat Ibiza?

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Headlight
Operation: How to disassemble the front headlights in the Seat Ibiza?

In this tutorial, we can see how to remove the front headlights in the Seat Ibiza, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the engine hood, locate the plastic rivets placed on the upper edge of the grille, and remove them with a screwdriver with a flat tip. Then move underneath the vehicle, unscrew the indicated fixing screws, and continue by removing the accessible bolts from the wheel arches. At this point, all that remains is to separate the bumper from the frame, unscrew the fixing bolts of the headlights, and disconnect the power connectors. To install the replacements, simply follow the reverse procedure.


Posted on 24 September 2023 by ScegliAuto



How to disassemble the headlights in the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial we can see how to remove the front headlights in the Seat Ibiza, a very simple operation but that requires removing the bumper. Firs
How to replace the front headlights bulbs in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this tutorial, we can see how to replace the front headlight bulbs in the Seat Ibiza, an extremely simple and fast operation. First of all, make s
How to change the headlight bulb on Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) How to replace the front bulbs on our car? Let's see how to remove them from inside the lighthouse of an Ibiza. We unhook and lift the front hood of

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos