Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front grille of a Seat Ibiza.

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Grille

See other generations:
Video tutorial

To remove the grille from the front of a Seat Ibiza, follow these simple instructions: apply masking tape around the work area on the bodywork to avoid scratches. In the emblem/grille, there are two plastic cross-head screws at the top; remove them carefully to avoid breaking the plastic.

After removing the screws, the emblem is still held in place by two hooks at the bottom and some side clips, which we will gently lift. Once all the fastening points are released, the emblem/grille should come off completely; check that there are no wires or connectors attached and remove the grille.


Posted on 24 December 2025 by ScegliAuto


Related tutorials

Replacement of the front bumper grille of the Seat Ibiza
Replacement of the front bumper grille of the Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Today we will see the steps that will allow us to disassemble and replace the front bumper grille of the Seat Ibiza. First, we open the car's hood an…
How to Remove the Front Bumper of a Seat Ibiza
How to Remove the Front Bumper of a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Today, you will learn the steps to remove the front bumper of the Seat Ibiza model 6L. The first step is to open the bonnet and remove the four screw…
How to Install the Radiator Grille on a Seat Ibiza 6J
How to Install the Radiator Grille on a Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6J, 6P) In this video, you will learn how to install the radiator grille on a Seat Ibiza 6J. First, remove the two push screws located at the top of the fron…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos