Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on a Seat Leon

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

Through this very short tutorial today, you will see the entire procedure necessary to reset the service light on a third-generation Seat Leon, a model produced from 2012 to 2019. Let's start the operation by pressing and holding the "0.0/SET" button, then turn on the vehicle's ignition without starting the engine.

Once done, you will see a request on the information display to reset the oil change, so confirm by releasing and pressing the "0.0/SET" button again.

Finally, repeat the same operation, but keep the "0.0/SET" button pressed for a few more seconds during the ignition to also reset the inspection light and complete the task.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Seat Leon 2
How to reset the service light on the Seat Leon 2
Seat Leon (2005-2013 / 1P) To manually reset the service light on your second series Seat Leon, follow the procedure described in this guide. First, get into the car and reach …
How to Reset the Service Light in a Seat Leon?
How to Reset the Service Light in a Seat Leon?
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…
Resetting the Service Light on a Seat Leon
Resetting the Service Light on a Seat Leon
Seat Leon (2005-2013 / 1P) Today, we will see how to reset the service light for the regular maintenance of the engine oil change on a Seat Leon. First, get inside the cabin an…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos