Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Toledo
    4. : How to reset the service in the Seat Toledo?

Seat Toledo - Video tutorial

Model: Seat Toledo 5P, MK 3 - Years 2004-2009
Part: Checks and maintenance
Operation: How to reset the service in the Seat Toledo?

In this tutorial, we can see how to reset the service in the Seat Toledo, an extremely simple and fast operation, to be carried out only once all the required scheduled maintenance work has been completed. Let's start by going inside the cabin, then insert the key but leave it in the first position. Then, press and hold the button located in the center of the dashboard, simultaneously turn on the instrument panel, and when the screen changes, rotate the same button clockwise. To complete the procedure, simply restart the instrument panel.


Posted on 12 February 2024 by ScegliAuto



How to reset the service in the Seat Toledo?
Seat Toledo (2012-2019 / KG, MK 4) .. In this tutorial, we can see how to reset the service in the Seat Toledo, an extremely simple and quick operation, to be carried out..
How to reset the service in the Seat Toledo?
Seat Toledo (2012-2019 / KG, MK 4) .. In this tutorial, we can see how to reset the service in the Seat Toledo, an extremely simple and quick operation to be performed..
How to reset the service in the Seat Toledo?
Seat Toledo (1998-2004 / MK 2, 1M) .. In this tutorial we can see how to reset the service in the Seat Toledo, an extremely simple and fast operation, to be performed..

Other guides that may interest you

    Frequently Asked Questions

    • Toledo 1998-2004 - How do you replace the window lifter on the Seat Toledo? Read Answer
    • Toledo 1998-2004 - Where is the Seat Toledo MAP sensor located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos