Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Seat Ibiza?

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

The procedure to reset the Service light on the Seat Ibiza involves holding down the 0.0/SET button located in the centre of the instrument cluster. While holding the button, insert the ignition key into the ignition switch and turn it to switch on the instrument cluster. You can then release the 0.0/SET button and press the one next to it, which has the icon of two rectangles. Doing this will cause the Service light to completely disappear from the instrument cluster, which can then be turned off by turning the ignition key again.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light of the Seat Ibiza
How to Reset the Tyre Pressure Light of the Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) Today, we will discover how to reset the tyre pressure light of the Seat Ibiza; before resetting the TPMS sensors, ensure all four tyres are at the c…
How to Replace the Internal Handle of a Seat Ibiza
How to Replace the Internal Handle of a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Start by opening the door of your Seat Ibiza. Next, remove the door panel by unscrewing the fixing screws and disconnecting the electrical connectors…
How to reset the service indicator in the Seat Ibiza?
How to reset the service indicator in the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) Resetting the service in the Seat Ibiza, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos