|
Do it yourself
| |||
| ||||
Model: Sherco Sef 300
In today's video tutorial, you will learn how to install radiator protection guards on a Sherco 300 SEF Factory in simple steps. First, remove the seat of your bike; then disconnect the fuel hose and the electrical connector, as shown in the video. Next, unscrew the screws of the tank and the side panels to access the side brackets of the radiator; unscrew the fixing bolts of the radiator. Finally, install the guards on the radiator brackets, secure them, and reassemble everything!
Updated on 10 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Sef 300
In order to replace the exhaust of the Sherco SEF 300, you need to loosen the screws that secure the panel located on the rear side of the motorcycle…
Sef 300
In order to replace the fuel filter of the Sherco SEF 300, you need to locate the fuel passage conduit where the fuel filter is located: this will be…
Sef 300
To replace the spark plug on a Sherco SEF 300, completely remove the seat of the bike to access the components underneath. Here, you will locate the …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |