Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How to replace the headlight bulbs of a Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Light bulb
Operation: How to replace the headlight bulbs of a Skoda Fabia

Do you want to replace the headlight bulbs of a Skoda Fabia and don't know how to do it? Let's see together how to proceed in the illustrative video. We open the bonnet of the luggage compartment, open the inspection compartment of the headlights (side cloth covering) with a screwdriver, disconnect the bulb holder from the headlight and disconnect the relative power supply terminals. We replace damaged bulbs with pieces of the same size and voltage. After replacing the bulbs, we mount the lamp holder in the headlight housing. Finally, we close the inspection compartment with the cloth cap. We test the correct functioning of the lights.


Posted on 8 October 2023 by ScegliAuto



How to replace headlight bulb on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Let's see how to replace the bulbs mounted in the headlight on Skoda Fabia. We open the front hood by pulling the lever located at the bottom right o
How to replace headlight bulb on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Let's see how to remove the headlight bulbs of a Skoda Fabia. We open the bonnet by pulling the lever located at the bottom right of the dashboard, l
Headlight bulb replacement on Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Let's see the replacement of the headlight bulb of a Skoda Fabia. We lift the front hood and identify the cap that closes the headlight. We detach th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos