Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight of a Skoda Fabia II

Model: Skoda Fabia Mark2, 5J - Years 2007-2014
Part: Headlight

In this video, we see how to remove the front headlight of a Skoda Fabia II: we open the hood and see that there are T25 screws at the top, while inside at the bottom we find a T30 screw and a 10 bolt; we will have to remove the front wheel arch held by four screws on the outer side, two 30 bolts on the front side and a series of clips that hold it fixed to the bodywork. After this, we will remove the 25 screws we saw at the top and all the others we saw earlier. We pull the headlight towards us and disconnect the electrical connector. Operation completed.

Posted on 24 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the 2017 Skoda Fabia.
How to replace the headlight bulb of the 2017 Skoda Fabia.
Skoda Fabia (2014-2021 / Mark3, NJ) In this new mini guide, we will explain how you can replace the headlight bulb of your Skoda Fabia third series (year 2017). The entire procedure tak…
Removing the Front Headlight of the Skoda Fabia
Removing the Front Headlight of the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) Below are all the instructions to remove and replace the front headlight of the Skoda Fabia. First, open the vehicle's bonnet and start by removing t…
Replacement of the front headlight of the Skoda Fabia
Replacement of the front headlight of the Skoda Fabia
Skoda Fabia (1999-2007 / 6Y, Mark1) Today we will discover the instructions that will allow us to disassemble and replace the front headlight of the Skoda Fabia in simple steps. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos