Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Skoda Octavia?

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery in a Skoda Octavia, a very simple and quick operation. You will need a replacement battery of type CR2025 and a small flat-head screwdriver.

First, extend the metal key by pressing the designated button, then lever at the indicated edge to release the rear cover. Next, remove the old battery using the screwdriver, insert the replacement ensuring the correct polarity, and reassemble everything by following the reverse procedure.


Posted on 25 April 2026 by ScegliAuto


Related tutorials

Replacing the Remote Battery of the Skoda Octavia
Replacing the Remote Battery of the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Below is the procedure to disassemble and replace the battery of the Skoda Octavia key remote. First, take the remote and start by removing the rear …
How to Replace the Remote Battery of the Skoda Octavia 3
How to Replace the Remote Battery of the Skoda Octavia 3
Skoda Octavia (2012-2019 / 5E, MK 3) If the remote for your Skoda Octavia third generation (2012-2019) has stopped working due to a completely exhausted battery and you want to learn how…
How to Replace the Remote Battery on a Skoda Octavia
How to Replace the Remote Battery on a Skoda Octavia
Skoda Octavia (2019-2026 / MK 4, NX) In this video, you will see how to replace the dead battery in the remote for the fourth-generation Skoda Octavia. Start by removing the metal key by…

    Frequently Asked Questions

    • Octavia 2012-2019 - What to do when the key is not detected on the Skoda Octavia? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos