Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Skoda Octavia 3

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

If the remote for your Skoda Octavia third generation (2012-2019) has stopped working due to a completely exhausted battery and you want to learn how to replace it, read this guide carefully. First, take the remote and slide out the physical key located on the side of the cover.

Next, remove the rear cover and use a flat screwdriver to take out the button battery. Finally, insert the new battery (model CR 2025) and refit the rear cover correctly.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of a Skoda Octavia
How to Replace the Key Fob Battery of a Skoda Octavia
Skoda Octavia (2019-2026 / MK 4, NX) The steps to replace the key fob battery of a Skoda Octavia are very straightforward. Take the fob and first press the button located in the upper co…
Replacing the Remote Battery of the Skoda Octavia
Replacing the Remote Battery of the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Below is the procedure to disassemble and replace the battery of the Skoda Octavia key remote. First, take the remote and start by removing the rear …
How to replace the battery of the Skoda Octavia 3 remote control
How to replace the battery of the Skoda Octavia 3 remote control
Skoda Octavia (2012-2019 / 5E, MK 3) To replace the battery inside the remote control of your Skoda Octavia third edition, you need to pay attention to the steps described in the followi…

    Frequently Asked Questions

    • Octavia 2012-2019 - What to do when the key is not detected on the Skoda Octavia? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos