Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Light on a Škoda Citigo?

Model: Skoda Citigo MK 1 - Years 2011-2020
Part:

You can completely clear the tyre pressure light on a Škoda Citigo by inflating the tyres to the optimal pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once you have inflated the tyres, turn on the instrument panel by inserting the ignition key into the corresponding switch. Then, press and hold the SET button located on the centre console just behind the gear lever. After holding it for a few seconds, you will notice that the light will be cleared.

Posted on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Citigo (2011-2020 / MK 1) You can completely eliminate the Service light from the dashboard of the Škoda Citigo by holding down the button located at the bottom centre of the …
Skoda Citigo (2011-2020 / MK 1) In this tutorial, you will see how to reset the tyre pressure light on a Skoda Citigo, a very simple and quick operation, to be performed only after …
Skoda Citigo (2011-2020 / MK 1) In this tutorial, you will see how to reset the tyre warning light on a Skoda Citigo, an extremely simple and quick operation to perform only after r…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos