Do it yourself
| ||||
|
Skoda Octavia - Video tutorial
Model: Skoda Octavia
1U, MK 1
- Years 1996-2004 Raise the car on a lift and remove the front wheel, the brake calliper, the relative support and the disc. In order to replace the hub bearing on board the car, without disassembling the hub itself, special tools are required to be able to extract and reinsert the bearing (otherwise disassemble the hub and carry out the operation with a press). Block rotation of the hub and unscrew the central fixing nut of the axle shaft; apply the hydraulic extractor to extract the drive shaft and then the pull hammer to extract the hub; then release the bearing fastening front seeger, re-apply the hydraulic extractor with the special bushings to extract it and remove the rear seeger. In the same way, insert the new rear seeger, the bearing and the front seeger. Then use the special extractor to remove the bearing ring which has remained on the hub axis and reassemble the latter in its seat. Finally, reassemble the drive shaft, disc, support, caliper and wheel.
Posted on 13 July 2023 by ScegliAuto
Replacement of front brake pads
Skoda Octavia (2004-2012 / MK 2, 1Z) To replace the front brake pads, lift the car on suitable car stands and remove the front wheel; therefore disconnect the wear sensor socket, remove
Headlight height adjustment motor replacement
Skoda Octavia (1996-2004 / 1U, MK 1) Inside the passenger compartment, generally near the headlight switch knob, there is a wheel that allows you to adjust the height of the headlights a
How do I replace the heating radiator on the Å koda Octavia?
Skoda Octavia (1996-2004 / 1U, MK 1) In order to replace the heating radiator of the Å koda Octavia you have to completely disassemble the dashboard: you have to start by removing the fr Other guides that may interest you
|
Frequently Asked QuestionsHow to activate the fog lights in the Fiat 500Fog lights are very important in case of rather poor visibility conditions. In fact, they allow you to have an excellent field of vision even in the presence of strong fog. But how are they activated? If you too are wondering, don't worry because just follow the instructions below. In the center of the dashboard, just below the car radio, locate the button on the right with the symbols of the fog lights above it. Press once to activate the front ones. Press again if you want to activate both the front and the rear ones. Finally, to turn them off, press a third time. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |