Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wheel Bearing on a Skoda Fabia 6Y

Model: Skoda Fabia Mark1, 6Y - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Bearing

See other generations:
Video tutorial

In this video, you will learn how to change the wheel bearing on a Skoda Fabia 6Y: first, lift the vehicle using at least a jack and two axle stands. Remove the rear wheel and locate the bolt on the hub that needs to be undone.

Remove the hub, then take off the protective cap using a hammer and a flathead screwdriver; using a 30 mm spanner, remove the central wheel pin. Pull out the flange and insert the new one; insert the new central pin, tighten it well, and refit the protective cap. Refit the hub in its place, secure it with its bolt, and put the wheel back on. You can lower the vehicle back to the ground.

The operation is complete.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Change the Key Battery of a Skoda Fabia
How to Change the Key Battery of a Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) The video guide available shows how to change the battery of a key from the Volkswagen group, including Audi, Skoda, and Seat, so it is also applicab…
Where is the fuse box in the cabin of the Skoda Fabia 3 located?
Where is the fuse box in the cabin of the Skoda Fabia 3 located?
Skoda Fabia (2014-2021 / Mark3, NJ) If you own a third edition Skoda Fabia and want to find out where the interior fuse box is located, all you have to do is follow the steps described …
Where to Find and How to Access the Fuse Box on a Skoda Fabia?
Where to Find and How to Access the Fuse Box on a Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) The fuse box on your Skoda Fabia is located on the left side of the dashboard. To access it, start by opening the driver's side front door. Then, ins…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos