Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to refuel AdBlue in the Skoda Octavia

Skoda Octavia - Video tutorial

Model: Skoda Octavia NX, MK 4 - Years 2019-2024
Operation: How to refuel AdBlue in the Skoda Octavia

AdBlue liquid is a special additive introduced a few years ago in all vehicles equipped with Diesel engines. Its main function, in fact, is to reduce the level of pollution in a simple and economical way. Below we will find out together how to refuel AdBlue in the Skoda Octavia. Before proceeding, make sure you buy a tank of this additive that is perfectly compatible with your car. With the vehicle completely off, go to the rear and open the fuel filler flap. Locate the blue cap and unscrew it. Immediately afterwards, pour in the new AdBlue until the special tank is completely filled. Finally, screw the cap back on and close the flap.


Posted on 20 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Octavia 2019-2026 - What does the cooling light on a Skoda Octavia mean? Read Answer
    • Octavia 2019-2026 - Why doesn't my Skoda Octavia fuel filler flap open? Read Answer
    • Octavia 2019-2026 - What do the lights on in a Skoda Octavia mean? Read Answer
    • Octavia 2004-2012 - How much does a Skoda Octavia window lift relay cost? Read Answer
    • Octavia 2012-2019 - What is the basic list price of a Skoda Octavia Wagon? Read Answer
    • Octavia 2004-2012 - What does the Airbag warning light mean in the Skoda Octavia Read Answer
    • Octavia 2004-2012 - Where is the central locking located in a Skoda Octavia? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos