Do it yourself
| ||||
|
Skoda Fabia - Video tutorial
Model: Skoda Fabia
Mark1, 6Y
- Years 1999-2007 Let's see in this guide how to remove and replace the lock cylinder and the front door handle of the Skoda Fabia. First we open the front door and start by disassembling and removing the door panel, prying the sides with something thin, then disconnecting the handle cable and the electrical connector; after which we use a T20 torx screwdriver to unscrew the screw located inside the side hole, in order to release the lock cylinder, as shown in the video. We replace, if necessary, also the handle, following the video tutorial to the end!
Posted on 2 May 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |