Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Karoq
    4. : How to replace the remote control battery of the Skoda Karoq?

Skoda Karoq - Video tutorial

Model: Skoda Karoq MK 1 - Years 2017-2024
Part: Key
Operation: How to replace the remote control battery of the Skoda Karoq?

In the following video tutorial we can see how to remove and replace the remote control battery of the Skoda Karoq. This is a very simple operation, we need a spare battery, model CR2025, a small flat-tip screwdriver or an equivalent tool. As shown in the video, we extend the metal emergency key and, with the screwdriver, we open the rear door by levering in the slot just released from the key. At this point we can proceed to replace the battery taking care to position it in the right direction, that is to say with the positive pole facing us.


Posted on 8 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Karoq 2017-2024 - Why doesn't the Skoda Karoq recognize the key? Read Answer
    • Karoq 2017-2024 - Why does the Skoda Karoq not detect the key? Read Answer
    • Karoq 2017-2024 - Why does the Skoda Karoq not open with the electronic key? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos