Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Fog Light on the Skoda Octavia in a Few Steps

Model: Skoda Octavia MK 4, NX - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fog lights

See other generations:
Video tutorial

If you live in areas prone to fog, it's essential to have functioning fog lights. Replacing them requires just a few simple steps and takes only a few minutes.

First, ensure both the engine and lights are off. Remove the side part of the lower grille using a suitable screwdriver. Next, locate the three screws holding the light in place and completely unscrew them.

Disconnect the connector. Take the new fog light and connect it. Repeat the same process on the other side if necessary.

Refit the screws you removed earlier and finally, reposition the grille correctly.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Replacement of the front fog light bulb of the Skoda Octavia
Replacement of the front fog light bulb of the Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) In this short and simple guide, we will see the process of disassembly and replacement of the front fog light bulb of the Skoda Octavia. First of all…
How to Replace the Front Fog Light and Bulb on the Skoda Octavia
How to Replace the Front Fog Light and Bulb on the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) In this video tutorial, you will see how to dismantle and replace the front fog light and its bulb on the Skoda Octavia. First, move to the front of …
How do you replace the fog light on the Škoda Octavia?
How do you replace the fog light on the Škoda Octavia?
Skoda Octavia (2012-2019 / 5E, MK 3) In order to replace the fog light of the Škoda Octavia, you need to use a tool to pry and detach the grille on the bottom of the bumper. This will al…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos