Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to reset the tire warning light on a Skoda Octavia 2

Skoda Octavia - Video tutorial

Model: Skoda Octavia MK 4, NX - Years 2019-2024
Operation: How to reset the tire warning light on a Skoda Octavia 2

The ideal tire pressure for the Skoda Octavia is indicated in a different place than usual: on the fuel filler flap. Now let's see how we can reset the warning light that warns us of a tire fault, always remembering that, before doing this, it is advisable to check that all the tires have been correctly reset. Turn the key to position 1 on the ignition and close all four doors: press the "car" button on the central screen, then the "settings" button and then the "tyres" button, then "set" regarding the pressure and finally confirm . Done. To check, turn the key to position = and then switch on again. The tire warning light will not come on again.


Posted on 27 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Octavia 2019-2026 - What does the cooling light on a Skoda Octavia mean? Read Answer
    • Octavia 2019-2026 - Why doesn't my Skoda Octavia fuel filler flap open? Read Answer
    • Octavia 2019-2026 - What do the lights on in a Skoda Octavia mean? Read Answer
    • Octavia 2004-2012 - How much does a Skoda Octavia window lift relay cost? Read Answer
    • Octavia 2012-2019 - What is the basic list price of a Skoda Octavia Wagon? Read Answer
    • Octavia 2004-2012 - What does the Airbag warning light mean in the Skoda Octavia Read Answer
    • Octavia 2004-2012 - Where is the central locking located in a Skoda Octavia? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos