Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Interval on a Skoda Octavia

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

If you have replaced the engine oil and filter on this model, the description below outlines all the operations and steps to reset it. After accessing the cabin, keep the ignition off. Press the button to the right of the speedometer at the bottom and hold it down.

Then turn on the ignition.

The display will show "Service INSP". Release the button and press it again within 20 seconds. After this, the service will be reset.

To verify, turn off and then turn on the ignition.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Reset maintenance interval of Skoda Octavia
Reset maintenance interval of Skoda Octavia
Skoda Octavia (2019-2026 / MK 4, NX) Today we will discover the steps that will allow us to reset the maintenance interval (service) of the Skoda Octavia. First of all, we get into the c…
How to Reset the Service Light on a Skoda Octavia
How to Reset the Service Light on a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) To reset the maintenance warning on a Skoda Octavia Mk2, ensure the instrument panel is off. Press and hold the button used for resetting the trip od…
How to Reset the Service Light in a Skoda Octavia
How to Reset the Service Light in a Skoda Octavia
Skoda Octavia (2019-2026 / MK 4, NX) To reset the service light in a Skoda Octavia, turn on the ignition without starting the engine and use the wheel on the right side of the multifunct…

    Frequently Asked Questions

    • Octavia 2012-2019 - What does the p171900 fault code on the Skoda Octavia mean? Read answer

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos