Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Skoda Octavia

Model: Skoda Octavia MK 4, NX - Years 2019-2026
Part: Service warning light

To reset the service light in a Skoda Octavia, turn on the ignition without starting the engine and use the wheel on the right side of the multifunction steering wheel to navigate through the display screens. Select the trip data display and highlight the "Since Start" screen. At this point, press and hold the confirmation wheel for a few seconds until the service menu appears. Within the menu, select the option for maintenance reset or oil change and confirm the operation. Wait for the system to complete the procedure and display the new maintenance interval. Finally, turn off and restart the ignition to verify that the service warning has been correctly cleared.

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Skoda Octavia 1
How to Reset the Service Light of the Skoda Octavia 1
Skoda Octavia (1996-2004 / 1U, MK 1) In this new guide for those who own a first-generation Skoda Octavia, you will find a description of all the steps needed to reset the service light.…
How to Reset the Service Light on the Skoda Octavia IV
How to Reset the Service Light on the Skoda Octavia IV
Skoda Octavia (2019-2026 / MK 4, NX) This video shows how to reset the service light on the Skoda Octavia IV. This vehicle typically requires resetting via a diagnostic tool; however, th…
How to reset the "Service" indicator on a Skoda Octavia?
How to reset the "Service" indicator on a Skoda Octavia?
Skoda Octavia (2004-2012 / MK 2, 1Z) Good morning, today's goal is to reset the "Service" light on our Skoda Octavia. Let's start by sitting in the driver's seat of the car. Then, we wil…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos