Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Karoq
    4. : How to remove the AdBlue warning light on Skoda Karoq?

Skoda Karoq - Video tutorial

Model: Skoda Karoq MK 1 - Years 2017-2024
Part: Checks and maintenance
Operation: How to remove the AdBlue warning light on Skoda Karoq?

If the AdBlue warning light has come on in the dashboard of our Skoda Karoq, it means that the anti-pollution liquid has reached the minimum level and therefore needs to be topped up. It is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we buy a 10-liter can of liquid from an auto parts store, then we turn off the engine and open the fuel door. We then unscrew the blue cap on the left, insert the supplied tube into the hole and pour in the amount of liquid necessary to reach the maximum level.


Posted on 26 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Karoq 2017-2024 - What to do when the central locking system of the Skoda Karoq is not working? Read Answer
    • Karoq 2017-2024 - How much is the coupon for the Skoda Karoq? Read Answer
    • Karoq 2017-2024 - When to service the Skoda Karoq? Read Answer
    • Karoq 2017-2024 - How do I reset the Service light on the Å koda Karoq? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos