Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Karoq
    4. : How to reset the engine oil warning light on the Skoda Karoq

Skoda Karoq - Video tutorial

Model: Skoda Karoq MK 1 - Years 2017-2024
Part: Checks and maintenance
Operation: How to reset the engine oil warning light on the Skoda Karoq

Today we will see in this guide how to reset the service light of the routine maintenance of the Skoda Karok engine oil change, in simple and quick steps. First of all, let's get on board the car and make sure we have all the doors closed; then we go to press and hold the "set" button that we find on the instrument panel, and then turn the key to position one to turn on the ignition, as shown in the video. We will see that the warning light reset procedure will begin, until it goes out completely, restoring the mileage that can be traveled before the next service!


Posted on 4 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Karoq 2017-2024 - What to do when the central locking system of the Skoda Karoq is not working? Read Answer
    • Karoq 2017-2024 - How much is the coupon for the Skoda Karoq? Read Answer
    • Karoq 2017-2024 - When to service the Skoda Karoq? Read Answer
    • Karoq 2017-2024 - How do I reset the Service light on the Å koda Karoq? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos