Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Fuel pump

Below we will see the main instructions that will allow us to disassemble and replace the fuel pump of the Smart Fortwo. In order to access the fuel pump, it will be necessary to disassemble and remove the tank; so we lift the car to unscrew all the screws, as shown in the video. At this point we disassemble the fuel pump, unscrewing the ring and disconnecting the fuel lines; then we replace and install the new original pump, finally reassembling the fuel tank and making the various connections, following the video tutorial until the end!

Posted on 22 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the fuel pump (float) of the Smart Fortwo
Disassembly of the fuel pump (float) of the Smart Fortwo
Smart (2007-2015 / 451) We see in this guide the main instructions that will allow us to disassemble and replace the fuel pump or the tank float of the Smart Fortwo. First w…
How to open the fuel cap of the Smart Fortwo
How to open the fuel cap of the Smart Fortwo
Smart (2014-2022 / 453) Let's find out in this short guide how to open the petrol cap and how to refuel the Smart Fortwo. First, let's move to the right side of the car and …
How to Replace the Fuel Filler Cap on Smart Fortwo
How to Replace the Fuel Filler Cap on Smart Fortwo
Smart (1998-2007 / 450) Don't know how to remove the fuel filler cap on Smart Fortwo? Follow these steps: open the fuel filler cap, unscrew the screws around the perimeter o…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos