Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout of the Smart ForTwo?

Model: Smart Smart 453 - Years 2014-2022
Part: Fuse box

In this video we can see where the fuse box is located in the Smart ForTwo and what is the corresponding diagram, useful in case we need to check the fuses of a malfunctioning device. We find the first and only box inside the passenger compartment, precisely behind the glove compartment on the passenger side. To access it, it will be necessary to open the drawer, empty it and detach it from the dashboard. In case of a blown fuse, make sure to use replacements with equivalent specifications and always operate with the vehicle turned off, so as not to cause any damage.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Diagram and location of the fuse boxes of the Smart Fortwo
Diagram and location of the fuse boxes of the Smart Fortwo
Smart (2007-2015 / 451) In this short and simple guide we will see where to find the fuse boxes, as well as where to find the diagram, of the Smart Fortwo. First of all, we …
What is the fuse diagram for the Smart ForTwo?
What is the fuse diagram for the Smart ForTwo?
Smart (2007-2015 / 451) In this video we can see where the fuse box of the Smart ForTwo is located and its corresponding diagram, useful in case we need to check the fuse of…
Fuse box diagram and location for the Smart Fortwo.
Fuse box diagram and location for the Smart Fortwo.
Smart (2007-2015 / 451) In this short guide, we will see the information related to the fuse scheme and positioning of the Smart Fortwo. First, let's get on board the passen…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

Replacing H7 Bulb in an Opel Meriva

Are the front headlight bulbs of your Opel Meriva out? Let's see how to proceed with the removal in this tutorial video. Open the bonnet and secure it, then remove the inspection caps from the headlights (at the back of the headlights) using a screwdriver or pliers. Disconnect the bulb holders from the headlight and disconnect the relevant power connectors. Replace the damaged bulbs with new ones (same size and voltage). After replacing the bulbs, refit the bulb holder into the headlight housing. Finally, close the back of the headlights with the inspection caps. Test the correct functioning of the lights by turning on the ignition.

Watch the video!


by ScegliAuto

More videos