Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Rear Wing on a Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Rear bumper

How to remove the right rear wing (located on the wheel) on a Smart Fortwo? Let's see how to proceed with the removal: first, using a socket wrench or battery screwdriver, unscrew the securing bolts located on the sides of the wing (right and left). Remove the bolts located underneath the wing (as shown in the video). Once the wing is free from any screws or bolts, take it by hand and pull it away from the bodywork (use a plastic or metal lever to assist). Finally, fit the new wing following the steps taken during removal.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlight Bulb on a Smart ForTwo?
How to Remove the Headlight Bulb on a Smart ForTwo?
Smart (2004-2006 / 454, Fourfour1) Start by removing the upper front cover of your Smart ForTwo using the ignition key, then remove the underlying plastic. Next, unclip and remove the …
How to Remove the Rear Bumper from a Smart ForTwo
How to Remove the Rear Bumper from a Smart ForTwo
Smart (2007-2015 / 451) Before starting, open the rear hatch of the boot on your Smart ForTwo. Start by unscrewing and removing the screws that secure the rear bumper to the…
How to Remove the Fog Lights on Smart Fortwo
Smart (2014-2022 / 453) Let's see how to remove the fog lights from the Smart Fortwo. Lift the car on a jack and remove the front wheel alongside the front fog light. Remove…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos