Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Timing belt

Today we will explain how to replace the timing belt of the Smart Fortwo in a simple and fast way. To perform the replacement of the belt, we need to loosen the pulley and the tensioner roller in order to easily remove the belt. After removing the piece, grease the new belt and place it inside the gears. Tighten the pulley and the tensioner roller to position the belt correctly. Lower the vehicle to the ground and start the engine to check that the replacement has been successful. The timing belt replacement should be done at 60,000 km.

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replace the timing chain on the Smart Fortwo 600 - 700
Guide to replace the timing chain on the Smart Fortwo 600 - 700
Smart (1998-2007 / 450) In this short guide we will see the main instructions for disassembling and replacing the timing chain on the Smart Fortwo 450, with a 600 0 700 petr…
How to replace the timing belt of the Smart 450
How to replace the timing belt of the Smart 450
Smart (1998-2007 / 450) To replace the timing belt of the Smart Fortwo model 450, we need to access the bottom part of the engine hood, located at the back of the vehicle. O…
How to replace the timing chain of the Smart Fortwo
How to replace the timing chain of the Smart Fortwo
Smart (1998-2007 / 450) Let's identify the main steps on how to disassemble and replace the timing chain of the Smart Fortwo; to access and replace the chain, it will be nec…

Other guides you may be interested in

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos