Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the convertible top of the Smart 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Convertible top

In order to replace the hood of the Smart 450, you will need to open it completely so that the entire canvas lining of the hood is completely lowered: after the lining has been lowered, it will be possible to locate the screws that secure the hood mechanism to its housing. You will need to unscrew all the screws in question and proceed to disconnect all the connectors that determine its movement: at this point it will be possible to insert the new hood and connect it properly to verify that everything works correctly.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Smart 450
How to Replace the Air Filter on the Smart 450
Smart (1998-2007 / 450) If you want to avoid overheating or loss of power in your Smart 450, you must periodically replace the air filter. Below, we will discover how to per…
How to Open the Bonnet on Smart Fortwo 450-451
How to Open the Bonnet on Smart Fortwo 450-451
Smart (1998-2007 / 450) In this video tutorial, you will see the instructions for opening the bonnet on a Smart Fortwo 450 and 451 in simple and quick steps. To open the bon…
How to Remove the Bonnet on a Smart Fortwo 450
How to Remove the Bonnet on a Smart Fortwo 450
Smart (1998-2007 / 450) In this video, you will see how to remove the bonnet on a Smart Fortwo 450 in simple and quick steps. First, unclip the lower front grille of the bon…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos