Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Air Filter on a Smart Fortwo

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

See other generations:
Video tutorial

To remove the engine air filter on a Smart Fortwo, open the boot of the car, lift the panel covering the engine, and secure it. Open the air kit (unscrew the securing screws with a screwdriver) and remove the cap of the filter box to extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly against the walls).

Finally, replace the cap of the air box and tighten the securing screws around the perimeter. Close the engine cover panel and the boot after completing the installation.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Removing the Engine Air Filter on a Smart Fortwo
Smart (2007-2015 / 451) Removing the engine air filter? Remove the engine air filter from the Smart Fortwo located in the engine compartment. Open the engine compartment of …
How to Remove and Replace the Engine Air Filter on a Smart Fortwo
How to Remove and Replace the Engine Air Filter on a Smart Fortwo
Smart (2007-2015 / 451) See how to remove and replace the engine air filter on a Smart Fortwo. Open and lift the rear hatch (where the engine is located), securing it. Remov…
How to Replace the Cabin Air Filter on the Smart Fortwo
How to Replace the Cabin Air Filter on the Smart Fortwo
Smart (2007-2015 / 451) To replace the cabin air filter on your Smart Fortwo yourself, simply follow the procedure described below. First, purchase a new filter ensuring it …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos