Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Fuse box

The specific fuse box of the Smart ForTwo will be located inside the cabin, in the part immediately below the dashboard trim panel, on the driver's side. Once the cover carpet is removed, access to the fuse box will be possible. Inside there are fuses that control the operation of the windshield wipers, headlights, engine cooling fan, etc. Inside this box there will also be relays that regulate the operation of the fuel pump, air conditioning, etc.

Posted on 2 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (1998-2007 / 450) All the fuse boxes of the Smart ForTwo are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: …
Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (1998-2007 / 450) Each of the fuse boxes of the Smart ForTwo is responsible for containing the fuses that regulate the operation of the devices installed on the vehicl…
Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (2014-2022 / 453) In the Smart ForTwo, all fuses are contained within a single fuse box that is installed in the vehicle: in this car model, the box is located inside …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos