Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the trays of a Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Checks and maintenance

Do you want to open the front bumper of your Smart Fortwo to carry out maintenance and various top ups? Let's see how to proceed in this video. We open the plastic levers on the sides of the front grille, lift the hood upwards, then remove it from the car body (as shown in the video). Once the aforementioned piece has been removed, we carry out maintenance on our car (topping up the liquids). To proceed with the assembly, we fix the plastic coating with our hands on the front part of the nose and then on the lower part. Finally, we close the levers of the front hood opening with our hands.

Posted on 29 December 2019 by ScegliAuto

This video is currently unavailable

Related tutorials

How to open the hood of the Smart Fortwo
How to open the hood of the Smart Fortwo
Smart (2007-2015 / 451) If we have to carry out maintenance on our Smart Fortwo we have to remove the front hood (topping up the trays), let's see how to do it. Unhook the t…
How to remove the gear knob of a Smart ForTwo
How to remove the gear knob of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we begin, we will have to sit in the driver's seat of our Smart ForTwo. In order to be able to carry out this disassembly in complete safety, …
How to open the front hood of a Smart ForTwo
How to open the front hood of a Smart ForTwo
Smart (2007-2015 / 451) Before we can start, we will have to get out of the cockpit of our Smart ForTwo, and then, we will have to head towards the front of the car. So let'…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos