Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to jack up the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Checks and maintenance

In the following video we will see how to lift our little Smart Fortwo with the jack, in case we want to remove and replace our wheel, for example: everything is done in total safety! First let's take our jack: let's find the anchoring area of our car that you find in the driving book of your car. In any case we will place it where those holes are underneath, as illustrated in the video. Before lifting the car, if we want to remove the wheel, we loosen the bolts with the wrench: then we lift the car and unscrew the bolts by hand to replace the wheel!

Posted on 29 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear knob of a Smart ForTwo
How to remove the gear knob of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we begin, we will have to sit in the driver's seat of our Smart ForTwo. In order to be able to carry out this disassembly in complete safety, …
How to replace the central engine mount in the Smart ForTwo?
How to replace the central engine mount in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the central engine mount in the Smart ForTwo, a very simple and quick operation. First of all, we lift bo…
Removing the starter motor of a Smart Fortwo
Removing the starter motor of a Smart Fortwo
Smart (2007-2015 / 451) Does the starter motor not work? Let's see how to remove the Smart Fortwo starter motor. We disconnect the battery terminals for safety. We lift the …

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos