Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disable traction control on Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Checks and maintenance

Let's see in this short video tutorial how to disable the traction control on a Smart Fortwo second series; walking without traction control can be dangerous. To remove it, first of all we go inside the car and turn on the ignition; then we turn off the ignition and press the two buttons on the instrument panel at the same time. At this point we turn the key in the meantime, turning on the ignition, and we will see that we have disabled the traction control, as shown in the video; applying the reverse procedure we will go to reactivate it!

Posted on 2 January 2021 by ScegliAuto

Video tutorial

Related tutorials

How to disable ESP on Smart Fortwo
How to disable ESP on Smart Fortwo
Smart (2007-2015 / 451) Let's briefly see in this guide the steps that will allow us to disable the ESP system or traction control on the Smart Fortwo; it is recommended nev…
How to activate and deactivate the Start&Stop function of the Smart Fortwo
How to activate and deactivate the Start&Stop function of the Smart Fortwo
Smart (2014-2022 / 453) In this guide, we will see the main instructions that will allow us to activate and deactivate the Start&Stop system of the Smart Fortwo. First of al…
How to deactivate the passenger airbag on the Smart Fortwo
How to deactivate the passenger airbag on the Smart Fortwo
Smart (2007-2015 / 451) In this video, we can see how to deactivate the passenger airbag on the Smart Fortwo: this operation is necessary if we are transporting a child in t…

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Remove the Front Headlamp of a Renault Clio

Remove the front headlamp of a Renault Clio. Open the bonnet by pulling the release lever and secure it; using a battery-powered screwdriver or a screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, remove the splash guard bolts and finally remove the bolts at the bottom of the bumper. Carefully detach the bumper from the body of the vehicle. At this point, disconnect the headlamps from the body (undo the securing bolts) and the bulb holder from the headlamp. Fit the new headlamp with new bulbs if damaged (always ensure the correct type and size) and insert the headlamp into its housing. Finally, refit the front bumper and tighten the bolts.

Watch the video!


by ScegliAuto

More videos